Products tagged with 'charger'

Musical tone to indicate once full charge is complete.

Model DC40RA is a fast charger developed for charging XGT Li-Ion batteries Equipped with two cooling fans, one for battery and the other for charging circuit enabling it to charge consecutive batteries at the optimum charge time

The 110v version of the DC18RC uses intelligent charging technology to control current, voltage and temperature to maximise battery life. It charges Makita 3.0Ah batteries in approximately 22 minutes, 4.0Ah Batteries in approximately 36 minutes and 5.0Ah Batteries in approximately 45 minutes.

This kit contains 4x Makita BL1860 18v 6.0Ah Li-Ion batteries with charge indicator LEDs, a DC18RD twin 18v intelligent charger and a MakPac 3 stacking case plus inlay. The BL1860 18v 6.0Ah battery is engineered to give more run time (twice the run time of the Makita 3.0Ah LXT battery), but with the same weight and dimensions as the lower-capacity 3.0Ah, 4.0Ah, and 5.0Ah LXT batteries. It reaches a full charge in only 55 minutes (with DC18RC / DC18RD fast chargers), the fastest charge time in its category. Includes a battery capacity indicator LED so you know how much charge is left. The DC18RD charges two 18v Li-Ion batteries simultaneously. The rapid charge technology selects the optimum voltage and current and temperature is controlled by the forced air system that circulates air through the battery to prevent overheating. and a full charge sound alert confirms when the charge cycle is complete. BL1860 Batteries

The Makita 191N14-5 240V Two Port Charger can charge two separate Makita XGT Li-Ion batteries at the same time. It has a handy charging status indicator light for maximum visibility, and offers a selectable melody sound for full charge notification. It includes two cooling fans, one for the charging circuit and one for the battery. It delivers optimum charging control by utilising feedback of real-time battery data, and can be wall mounted. The charger can perform consecutive fast charging of batteries, and features an electronic current limiter for overload protection.

The Makita 191N07-2 110V Two Port Charger can charge two separate Makita XGT Li-Ion batteries at the same time. It has a handy charging status indicator light for maximum visibility, and offers a selectable melody sound for full charge notification. It includes two cooling fans, one for the charging circuit and one for the battery. It delivers optimum charging control by utilising feedback of real-time battery data, and can be wall mounted. The charger can perform consecutive fast charging of batteries, and features an electronic current limiter for overload protection.

Positioning ◾ 2 x 18 volt batteries with 5.0 Ah and quick charge

The Bosch GAL18V-40 1600A019RK charger has a modern compact design.

Festool 201136 New Li-Ion Rapid Charger TCL 6 Reduced charging time

The Festool SYS-PST 1500 Li HP 240V 205722 is a mobile power supply for operating mains-powered machines and charging battery packs with mains voltage. The SYS-PowerStation provides power. Even where there would otherwise be none. As a high-performance energy storage solution, it allows users to be independent of traditional power sources, such as electrical outlet modules, generators or site distribution boards – to guarantee predictable everyday work. Without the need to find a power supply or the hassle of pulling cables, overloaded site distribution boards or problems with fuses switching off. With 3680 watts permanent power and up to 11,000 watts short-term power, it provides enough energy to power all mains-powered tools – even extractors, large saws and hammer drills – continuously with no losses of performance. Compact and mobile, it saves 1500 watt-hours of energy – for most applications, that is sufficient for a whole working day. Just like a normal 230 V electrical outlet module

This versatile Charger charges DeWalt 10.8v, 14.4v and 18v XR Li-Ion batteries

The DEWALT DCBP034-XJ 18V XR Compact Powerstack Battery is a small but highly powerful compact battery compatible with all DEWALT 18v tools. Compared to the DCB183 18v XR 2 ah battery, this Powerstack battery is 25% more compact and weighs 15% less, but also delivers 50% more power than predecessors. Its low impedance construction means the power provided is increased immensely, and it delivers an unbeatable thermal performance compared with cylindrical cells. This means the recharge cycles are increased. In addition, it is smaller and more compactly designed than a cylindrical cell, ensuring no space is wasted. The Powerstack battery is deal for for professional and DIY use.

The Dewalt 6Ah Single Port Charger DCB116-GB is an ideal charger for trade professionals as well as DIY enthusiasts. It has been designed with an improved state of charge indicator to give the user full control and understanding of the charge in hand. It has screw head slots making wall mounting an easy option, this is brilliant for workshops to save you having to find somewhere to store the charger and get it out every time you need to use it. The latching mechanism holds the battery in place securely for safety and ease when charging. This charger can charge 12V XR Dewalt batteries, 18V XR Dewalt batteries and 54V XR Flex Volt Batteries.

A complete battery and charger starter kit for Makita's 40v XGT cordless power tool range, the 191K01-6 Power Source pack contains a 40v battery charger and two 4.0ah XGT batteries along with a Makpac type 1 stackable case for transport and storage.

The Makita DC18SD charger is suitable for charging both 14.4V–18V in 60–90 minutes. The charger uses a CPU to communicate with the battery's built-in memory chip during a charge cycle, which analyses the data stored in the battery chip to decide on the best charging method at that time. This innovative technology results in longer battery life.

Hi-speed charger for STIHL professional lithium-ion batteries, the AP 180 and AR 900. The AL 500 takes 30 minutes to provide 100% charge for the AP 180 battery and 130 minutes for 100% charge for the AR 900 battery. The AL 500 can be wall mounted for convenient storage.

Makita developed the 40v Max XGT range for high demand tools used in continuous operations. The casing has a new design that protects the battery from dust and moisture, plus shock-absorbing padding protects it from drop impact damage.